Search results

I haven't been active so much lately and this is why. Working on my 89 240sx swapping to a 95 dual cam motor. Only paid $200 for the motor, but completely tore it down and rebuilt it. Got an obx header, f1 ultralight flywheel and arp headbolts with it. Really a lot involved for something that...

Just thought I would show everybody what I used. These work perfect to cap the line hole on the carb when removing the oil pump. They are 60cents at lowes for a 4 pack. You can remove the pump gear or make your own blockoff plate. this is really all you need for 60cent oil blockoff. Now the...

Stupid youtube made the vid a little laggy, was perfect before I uploaded it.

I find it entertaining to sling dirt everywhere, so I figured I would record it.

Well My dad is unemployed currently, so this will be the first time paying someone to do it. I am going to call around tomorrow. What is a decent price for bore/hone? I will hand them the piston and jug. it will be .040 over.

Some sellers say 88-06 and others say 03 and up only? I don't think there would be something different. Anyone think the newer wouldn't work on mine? I want to swap out my magura for an ez pull and cable. The magura is good, just gives less feedback to your hand. You cant feel the clutch quite...

Awhile back when I drilled the boost ports, I left out the wrist pin clips. After i took it for a less then 5 minute ride I came back to see the clips on the shelf. I just about sh*t. Anyway its def time for a bore. My ring gap was .012 over the limit. The piston out of round was .011 which is...

I need to measure my wear and figure what size to bore to. My question is say if i want .30 over How much bigger is the sleeve supposed to be than the piston? I'm thinking around 2-3 thousandths.

this is a good piston correct? I know wiseco is good but this specific piston? http://www.vitosperformance.com/atv_parts/product.php?productid=181&cat=237&page=1 I'm probably going to have to go .20 or .40, I have to measure the deepest gouge in it. Will this add any noticeable throttle...

I was browsing bikepics and came across this blaster. It looks all chromed or polished. Just thought it looks sweet. Throw 245stroker's motor in and you have a masterpiece haha.

I would like somthing like this If anyone has one..

I have a gallon of this metallic blue sitting in my basement. I am going to paint my car with it and possibly most everything metal on my blaster. A car usually takes only a 1/2 gallon at most so I will have plenty left. Do you think the color would go good?? I think the gallon was $60 and my...

Does the vito's +3 come with a spacer to keep the ports aligned? I know on hotrods its good to get a port job along with them and head redone from the misaligned ports. So with the vitos is it basically ready to go when you install it with the spacer?

This summer I plan to get a ported 240 and a +4mm crank setup. I have read around and some people say Big bores shorten the lifespan of an engine. Will this in fact shorten the lifespan and reduce reliability or is this just when you go way over bore?

How come on the reputation thing most people have one green square on theirs. Then I noticed phragle and blasterfreek have 2 green squares what does this mean?

Well I've got pro taper grips and use scott grip glue. They will hold for a little bit, but keep twisting off the bars before long. I even took sand paper and scuffed where you glue the bars. Any ideas on what would work better to make them permanent?

Got this thing 2 years ago for 40 bucks. It will do 0-40 in about 20 seconds lol.

How would you do it? I know there are ways while still retaining strength. I was thinking cut them right in the middle. Find some solid round stock the same size as the inside diameter of the tubing. say if I want 2 inches per arm. I would cut the stock to 4 inches or so slide it out and weld...

I was just wondering because I do as much playing on my guitars as I work on my blaster. I've been playing guitar since 7th grade self taught so I have about 7 years. I also can play the trombone lol since 5th grade, so eight years of that, but havent touched that ever since i graduated.

I spelled think wrong ^^^^^.I just did this, but one side looks lean and one side is a little rich. its about half around dark and exactly half lean looking. I think the ring might not be dark enough either. The pic makes it a little darker. What do you think lean or rich?