Latest activity
-
Bthe flywheel key may be sheared i think if its only going in reverse and a 35mm carb is way to big for a stocker, leave the stock carb...
-
BIts a timing issue..I bought a basket case Blaster once ,did the samething,6speeds of reverse.. Mine was caused by the stator I was...
-
I got a 96’ Yamaha Blaster that I put a Vito’s 240 kit and +3 stroker crank off my other blaster. Will run somewhat but would smoke... -
lightwylin19 replied to the thread Ceramic clutch ball.I ended up getting a ceramic one from kor but i haven't run the engine yet so hopefully it works okay lol -
01 blaster recently locked up on me. Bottom of the piston broke into pieces. Got it all cleaned out and rebuilt. After rebuilding it I... -
Yz2fiddyswapped replied to the thread Ceramic clutch ball.I’ve had no issues with my ceramic ball. Any 3/16 ball bearing should work. I’ve thought about seeing if race tech makes a Ti one as well -
K02 blaster new top end zero hours on it 68.25mm wiseco piston No airbox lid. Foam filter Full FMF exhaust 400 foot elevation
-
Kkrazyman1991 replied to the thread Jetting question, as if there aren't enough....I am in need of help as well I have a 2002 blaster brand new top end with 68.25 mm weisco piston. Full fmf exhaust with silencer. Foam...
-
Kkrazyman1991 replied to the thread Top end rebuild.I am in need of help as well I have a 2002 blaster brand new top end zero run time. It has 68.25 mm weisco piston. Full fmf exhaust...
-
Kkrazyman1991 replied to the thread I need help jetting my Blaster.I am in need of help as well I have a 2002 blaster brand new top end with 68.25 mm weisco piston. Full fmf exhaust with silencer. Foam...
-
EEddBoy3 replied to the thread Top end rebuild.Okay thanks may I ask what kit you got or recommend?
-
low_five replied to the thread Top end rebuild.You can get the kits on amazon, but they are a serious gamble. I got two kits before I knew any better. So far I have about 5 hours on... -
EFried the rings in my blaster!!! I have not done any research yet just thought I would ask for some suggestions first so anyone have any...
-
low_five reacted to Blaster_boy200's post in the thread A technical question about the choke? with
Like.
Thanks, all sorted, a slightly blocked fuel weiner was limiting the amount of fuel actually getting to the carb and causing the issue. -
Blaster_boy200 replied to the thread A technical question about the choke?.Thanks, all sorted, a slightly blocked fuel weiner was limiting the amount of fuel actually getting to the carb and causing the issue.