might be getting a new blaster!!!

[blasterguy15]

ok so on craigs list i found a blaster its an 01 and he says it runs great and its got an after market exhaust for 700$ and i havent seen it yet but im probably gonna sell my cr 250 and see if hell take 400 and go from there wat do u guys think

 

[Myblasterisblue]

Do a leak test, compression test and make sure its in decent shape. And it might be a good deal if he will take $400-$500

 

[dksix]

Try to build up some rapport with him before trying to low ball him, it's just good manners.

 

[blasterguy15]

im not gonna low ball at first im gonna idc if its in good shape im gonna rebuild the entire thing when i meet with him im gonna point out obvious stuff like tires tie rods bearings and other stuff and then rebuild it if i get it

 

[Myblasterisblue]

Thats what I do. Point out bad stuff and they usually take less

 

[blasterguy15]

well i called the guy he said he sold them but theres an 01 banshee with fmf pipes and its dune ported for 1000$ he says it needs a topend cause it was lean and it only had an hour on it so i actually think its the reeds

 

[Blasterr]

No Its gonna cost some coin to get it going, go with a cheap blaster. Its amazing how people want cash. I got a 04 for $200 .

 

[blasterguy15]

ok so im probably not gonna im just gonna buy a blaster and build it

 

[blasterguy15]

theres a blaster with a dg pipe 30mm carb 68mm wiseco piston 130 psi compression reed spacer and k&n filter for 1000

 

[blasterdemon7]

Don't rush it. You don't want to buy a good deal today and miss the killer deal tomarrow.

 

[blasterguy15]

well ya but in a really small town like the one i live in u never get deals like this