jetting bored .50 over P&P turbine core

[TJ_srh]

first post. here it goes

96 blaster
bored out .50 over
wiseco piston
Port & Polished
Turbine Core exhaust
FMF gold series pipe
Stock carb, reed and air filter and box

what size jets (main and pilot) and needle position? I live in western new york, we get feet of snow, so Im just looking for advise for both summer and winter situations. not a racer but more crazy trail riding for now.

 

[Wifesblaster]

My buddy has the same setup. He runs a 270 main and the stock 32.5 slow jet with the clip in the middle. He doesn't run an airbox lid. Not sure of your elevation though. We ride between 0-1000 feet. Runs a hair rich in the summer and perfect in the winter. And I think his air screw is 1.5 turns out.

 

[Awk08]

i'll second those facts
for starters
only a plug chop can tell you for sure if the main jet is spot on
do a search here for "plug chop" read and learn

 

[TJ_srh]

Thanks guys. I have already read the plug chop a couple months ago. I've just never posted anything til now.