My previous thred seems to have dropped into oblivion.
I have a 98 Blaster with a CT 240 big bore kit recently purchased and runs poorly.
Has a Keihin 35mm PWK.
#5 slide
DGH needle in the 4t slot down.
165 main jet
65 pilot jet
FMF gold pipe.
I'm at 3440 ft. elevation.
With aftermarket intake and exposed cone air filter.
Is this even close to the jetting it should be?
Unknown if it was ported.
Thanks for any info.
I have a 98 Blaster with a CT 240 big bore kit recently purchased and runs poorly.
Has a Keihin 35mm PWK.
#5 slide
DGH needle in the 4t slot down.
165 main jet
65 pilot jet
FMF gold pipe.
I'm at 3440 ft. elevation.
With aftermarket intake and exposed cone air filter.
Is this even close to the jetting it should be?
Unknown if it was ported.
Thanks for any info.