ok iv started makeing a custom air box for my blasty ill have pics up maby sometime tonight or tomorrow but im gonna be running a spectra air filter with it and sorry for the crappy welds i just started welding today
Looking good man. Iam sure a little time with a flap disc on a grinder and some polishing it'll look great.
Could do that too. Make sure to use some insulating tape on the front of it.
A word of advice, the reason you have crappy welds is mainly because the areas you are welding are filthy.
You must prepare the parent metal to accept the new filler.
It must be all shight and briny before you start welding, no weld will stick to corrosion, grease or grime.
The welds you have done show no sign of penetration and are most likely to break with the slightest vibration.
Run a grinding disk over them and reweld, turn the heat up a little and push the handpiece rather than drag it.
The idea is to burn a little and fill the void with filler wire.
Lap welds are the most difficult weld to master, congratulations on giving it a go.
I recon you should get a little bit of green for your efforts!