Crank case seal help! WITH VIDEO

[BlasterCaleb]

well i went to replace my crank seal and after a few frustrating hours i got the old one out... only to find some pretty bad scratches. i really need to know if these are too deep to just put a new seal in or if its not worth fixing so i can just sell it. or if their is something i can do to fix it. on top of that the new crank seal i put in ended up breaking so now im going crazy. + i dont even know if this is the real problem! Any help would be appreciated.

Video link below of close up of the scratches.

<iframe width="560" height="315" src="http://www.youtube.com/embed/PZURGdGOFCU" frameborder="0" allowfullscreen></iframe>






http://www.youtube.com/watch?v=PZURGdGOFCU&feature=youtu.be

 

[joeak47]

Once again ...
"I say Hmmmmmm"

How the hell did you manage that?
Was that from you removing the seal?
Or...was that from a previous owner?
If that was from you,what tools were you using?
My guess is a SCREWDRIVER and a perhaps a PUNCH...correct?
If it was you,why didn't you seak help BEFORE the damage was done?


Four minutes in,he tells you how to remove them...
This is being done on a Kawasaki 500CC triple...

 

[joeak47]

All is not lost however...
You can still get that to seal.

 

[BlasterCaleb]

And how would I do that? Just put it in?