yep, same 4 i got, they don't skimp on them
you could always shave the ket swith body enough to fit the bars and silicone tje housing back up.Drilled the clamp out! What a wast of time! I dont think the handle bars will fit with the switch!
View attachment 8887 View attachment 8888 View attachment 8889 View attachment 8890
you could always shave the ket swith body enough to fit the bars and silicone tje housing back up.
That looks easy enough.forgot to post this a few posts back about the key.........
banshee hide-a-key
View attachment 8972
surely with your skillz this is a 1/2 lunch project
but here's a link anyway
http://www.chaparral-racing.com/Product/modquad-hide-a-key-for-banshee/337-6683.aspx?sd=true
I don't think that hole is meant for a key. I thought the 4 holes are meant to bolt a kill switch onto it.
bars look sweet !
looks like you're cheating that brake master for those short lines ?
i know there's more room on them bars for it
i also cheated the banjo fittings downward as i see you did, and had to reroute my +2 lines down near the caliper to give me more slack up top.
you running stock length yet ?
So if i get a lever like in you pic above then i can get more room!
If i need longer brake lines i may get these. http://www.ebay.com/itm/50-Steel-Br...t=LH_DefaultDomain_0&var=&hash=item35d1a7fef0