Wth now!

gb blaster

New Member
Apr 19, 2012
722
7
0
Maryland
Okay so If u been reading my threads the blaster won't start here's some facts idk where to go now any suggesting or thoughts would be greatly appreciated!

Compression: 120psi
Leaktest: 7 psi for 15mins
Spark: blue sparks on plug grounded to cylinder
Fuel: rebuilt carb getting gas! Completely clean jets new needle valve an seats! Float height adjusted to 21mm on a stock mikuni carb!
Intake: New boysen dual stage reeds installed an leak free!

I've rebuilt carb! New reeds good compression! What's next any suggestings would be helpfully.
What are the symptoms of bad tors box btw? I still have tors could it be the culprit?
 
Last edited:
Try a differant plug. Sometimes a plug will fire grounded to engine but not under compression. Any possibility of a "Mouse House" in the ex pipe?
 
I'll blow compresse air threw pipe but we don't have nice around really... Gas was on an I made sure there was good flow from petcock.
 
Try a differant plug. Sometimes a plug will fire grounded to engine but not under compression. Any possibility of a "Mouse House" in the ex pipe?

That's good advice. If these suggestions don't end up fixing your problem, its time to check your flywheel key. This whole no-start problem is starting to sound like an out-of-time ignition system.
 
How do I check stator an working on fly wheel puller now! I'll check he'll
Can't hurt an we had a talk on the phone braap!

But if I blew my stator how do I got
Spark wouldn't that stop all spark?