A ALLBALLSRACING New Member Aug 9, 2012 21 0 0 Breezewood Pennsylvania Aug 10, 2012 #1 I just ordered one of the 3 mil stroker cranks from vitos. Is it really worth the hassle of splitting the cases and such?
I just ordered one of the 3 mil stroker cranks from vitos. Is it really worth the hassle of splitting the cases and such?
S scotj77 Member Feb 11, 2010 5,546 70 85 46 Orlando, fl Aug 10, 2012 #2 If you aren't planning on doing much modding to the blaster i would say no. Do you need a new crank or are you just doing it for performance
If you aren't planning on doing much modding to the blaster i would say no. Do you need a new crank or are you just doing it for performance
A ALLBALLSRACING New Member Aug 9, 2012 21 0 0 Breezewood Pennsylvania Aug 10, 2012 #3 Well both really, the threads on the end of my crank are screwed up, but I was also looking for a gain in the performance end too.
Well both really, the threads on the end of my crank are screwed up, but I was also looking for a gain in the performance end too.
A ALLBALLSRACING New Member Aug 9, 2012 21 0 0 Breezewood Pennsylvania Aug 10, 2012 #4 There will be some other mods too, i'm having it ported by FLOTEK and trying to find a bigger carb, I already have it bored .40 over
There will be some other mods too, i'm having it ported by FLOTEK and trying to find a bigger carb, I already have it bored .40 over
S scotj77 Member Feb 11, 2010 5,546 70 85 46 Orlando, fl Aug 10, 2012 #5 well bore size doesn't matter. and if flotek is porting it and you are getting a larger carb and have a decent aftermarket pipe the +3 is worth it
well bore size doesn't matter. and if flotek is porting it and you are getting a larger carb and have a decent aftermarket pipe the +3 is worth it
A ALLBALLSRACING New Member Aug 9, 2012 21 0 0 Breezewood Pennsylvania Aug 10, 2012 #6 Ok thanks man, just wanted to make sure it was going to be worth the hassle of splitting the cases.
B blasterBruce Member May 13, 2008 2,379 41 84 Griffin Ga Aug 10, 2012 #7 Its worth the hassle to split the cases to make sure your trans and other bottom end parts are still in good shape and useable !
Its worth the hassle to split the cases to make sure your trans and other bottom end parts are still in good shape and useable !
S scotj77 Member Feb 11, 2010 5,546 70 85 46 Orlando, fl Aug 10, 2012 #8 ALLBALLSRACING said: Ok thanks man, just wanted to make sure it was going to be worth the hassle of splitting the cases. Click to expand... yep it's worth it. just make sure you do everything properly with a leakdown test afterwards. also you have to check the cases for clearances with the stroker. sometimes they hit
ALLBALLSRACING said: Ok thanks man, just wanted to make sure it was going to be worth the hassle of splitting the cases. Click to expand... yep it's worth it. just make sure you do everything properly with a leakdown test afterwards. also you have to check the cases for clearances with the stroker. sometimes they hit
A ALLBALLSRACING New Member Aug 9, 2012 21 0 0 Breezewood Pennsylvania Aug 10, 2012 #9 Ok thanks guys, if I have any problems with clearing and leak down test and such I'll get ahold of one of someone.
Ok thanks guys, if I have any problems with clearing and leak down test and such I'll get ahold of one of someone.
B Budget_Blaster New Member Dec 25, 2009 1,630 13 0 Illinois Aug 10, 2012 #10 +3 dont need trenching.of course check it to make sure.
