I searched the forum and havent' come up with anything as far as getting rid of my TORS and the best/safest way to go about it without screwing up my quad? Any suggestions or info would be greatly appreciated.
Tors removal
- Thread starter Sabin1269
- Start date
Everything you need to know is right here. This will get rid of it all, as explained by yours, truly....
http://www.blasterforum.com/do-yourself-20/tors-system-removal-101-video-36551/
Or, if you don't want to un-wrap your whole wiring harness, try this:
http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/
http://www.blasterforum.com/do-yourself-20/tors-system-removal-101-video-36551/
Or, if you don't want to un-wrap your whole wiring harness, try this:
http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/
Found this in the do it yourself (DIY) section. Might help.
http://www.blasterforum.com/do-yourself-20/tors-system-removal-101-video-36551/
http://www.blasterforum.com/do-yourself-20/tors-system-removal-101-video-36551/
Vito's and Motion Pro both make them...Kit is about $ 40.00 or so. You can also try ebay and shouldn't have trouble getting one. Might get a better deal there.
When you get the kit, here's how to install it:
http://www.blasterforum.com/do-yourself-20/aftermarket-carburetor-cap-idle-screw-install-22174/
When you get the kit, here's how to install it:
http://www.blasterforum.com/do-yourself-20/aftermarket-carburetor-cap-idle-screw-install-22174/
Similar threads
