I took the end cap off my stock blaster exhaust pipe just to see what is inside, there seems to be a sort of "turbine" type thing in it.
Note, this thing is welded in and does not turn, also, it may not be clear from the picture but it is not open in the middle.
In other word the only way for exhaust gasses to escape is by flowing between the "blades".
I guess this is a type of spark arrestor.
Anyway, it's quite a long way in, about 8 or 10 inches from memory, looks quite restrictive to me and I'm planning on removing it with a suitably sized hole saw, is there any reason why I shouldn't do this?
Note, this thing is welded in and does not turn, also, it may not be clear from the picture but it is not open in the middle.
In other word the only way for exhaust gasses to escape is by flowing between the "blades".
I guess this is a type of spark arrestor.
Anyway, it's quite a long way in, about 8 or 10 inches from memory, looks quite restrictive to me and I'm planning on removing it with a suitably sized hole saw, is there any reason why I shouldn't do this?