Source Coil OHM question???

[Roccothebeast30]

Just Replace my source coil on the stator and I'm asking this question because I'm a little lost.

Repair manual Said 192-288 OHM.

But on my tester on old one and new one can't take mesurement in OHM just in KOHM. Repair manual mistake?

Reading: Old one: 31.2KOHM (busted)???
New One: 0.300KOHM

I guess that the new one means 300OHM but is already out of specification? higher is the values worst is the coil right?

Someone with experience can explain that to me ?

Thanks

 

[Larry's Shee]

What is the temperature you are taking reading at? Do belive the manual says 65* F

 

[Larry's Shee]

what brand of coil?

Have you tried to see if you have spark?

 

[tbrooks]

^^^ yes what brand coil, if its not oem throw it out, most all the aftermarket ones have been proven to be junk right out of the box

 

[Bluesman]

That's definitely not an OEM coil. Junk! Also, crimp connectors should not be used in an application that can leave you stranded in the woods and eaten by bears.

 

[Roccothebeast30]

What is the temperature you are taking reading at? Do belive the manual says 65* F

around 65 maybe 60!

 

[Roccothebeast30]

what brand of coil?

Have you tried to see if you have spark?

It's a RMSTATOR #RM00032 and the bike run great!

 

[Roccothebeast30]

That's definitely not an OEM coil. Junk! Also, crimp connectors should not be used in an application that can leave you stranded in the woods and eaten by bears.

No it's not and wire wasn't crimp connected, it's was welded with insulator tube. (connector only for ground side like OEM) Bike run great!