Well ive made a few posts here and there... but i think its time to make my own thread... im a technology junkie... who hasnt worked on an engine or a atv or even a weed eater in my life... I got this blaster in trade... and over the last couple days.. ive been in the process of tearing it down to the frame... and then start the task of putting her back together.... So far.. it looks like im going to be into a sh*tload of parts... ill try to source as much online from this forum and ebay to try to keep some costs down..... Ive order the cylmer manual and it should arrive in the next week or so... so between then and now.. my goal is to get the bike into piece and the engine out.. so i can start sanding etc on the frame parts....
Let the Pictures begin...
This is my Tent Garage thingy.... Few Snowblowers around... The new cubby is my main one..
So i got all the plastic off, gas tank off, the wiring was totally crapped, got the carb off, exhaust etc... i did this yesterday..
I realized im missing a bolt in the head..... Yikes.... Yet another thing ill have to cover..
Since the gas in this blaster was mixed already... i gotta assume it has the oil block off?? can you tell by the side view??
Not sure if it will show up.. by the case is cracked and broken away where the shifter enters... ( bought engines cases from blasterforum, stuck in customs)
Other side view.... jb weld on the side cover... also broken from chain slip... ( add one to the list i guess)
carb threads were stripped.. so this genius drilled holes and it was held ( loose term) by screws.... ( maybe fix?? or add it to the list..)
My box of parts... FMF gold series exhaust which doesnt seem to have any holes... suppose to be fmf silencer.. but no label i can see.. twist throttle somewhere in there... cables and other stuff that might be junk..
another shot of box.
The piston seems to move freely inside the case.... so thats a bonus i guess.
to be continued.
Let the Pictures begin...
This is my Tent Garage thingy.... Few Snowblowers around... The new cubby is my main one..
So i got all the plastic off, gas tank off, the wiring was totally crapped, got the carb off, exhaust etc... i did this yesterday..
I realized im missing a bolt in the head..... Yikes.... Yet another thing ill have to cover..
Since the gas in this blaster was mixed already... i gotta assume it has the oil block off?? can you tell by the side view??
Not sure if it will show up.. by the case is cracked and broken away where the shifter enters... ( bought engines cases from blasterforum, stuck in customs)
Other side view.... jb weld on the side cover... also broken from chain slip... ( add one to the list i guess)
carb threads were stripped.. so this genius drilled holes and it was held ( loose term) by screws.... ( maybe fix?? or add it to the list..)
My box of parts... FMF gold series exhaust which doesnt seem to have any holes... suppose to be fmf silencer.. but no label i can see.. twist throttle somewhere in there... cables and other stuff that might be junk..
another shot of box.
The piston seems to move freely inside the case.... so thats a bonus i guess.
to be continued.