Kill switch

[Blasterman16]

Is there a way to put a extra kill switch on a blaster

 

[Awk08]

yep,
tap it into any black and black/white stripe wire,
either set under the hood will work, 1 set to the killswitch on the bars, and another set to the keyswitch
when those 2 are connected it grounds out power to the ingnition circut

 

[Blasterman16]

Thank you man .

 

[Blasterman16]

And is that the same with a yz125?

 

[Blaaster]

You can do it on most bikes, but the colours may not correspond.

 

[Blasterman16]

Okay that I'll try it

 

[Taz100420]

My electronics are stripped down on my bike. I just added a on/off switch between my coil with extra spade connectors. I reach down and behind my leg to switch it off. I just drilled a hole in my plastic and mounted it up. Kinda tougher to do a plug chop now but meh only do one every so often!