so I got the idle screw kit with the drill bit and tap today , I need step by step details and specifics on how to install . Wanna be 100% sure I don’t mess anything up
Idle screw kit
- Thread starter Brenden Duso
- Start date
remove carb remove slide small amount of grease on tip of bit drill nice and strait.....small amount of grease on tap...tap nice and strait go slow take ur time as this is a fast job anyway....the grease is to prevent shavings falling in carb
Use lube on tap. Turn in about half turn, back it out quarter turn to clear chips.
Search forum for more detailed information.
Search forum for more detailed information.
http://www.blasterforum.com/threads/idle-kit-installation-instructions-blaster-banshee.52025/
Lots of lube on tap. Half turn in quarter turn out to clear chips.
Lots of lube on tap. Half turn in quarter turn out to clear chips.
Similar threads
