How much Trans Oil ?

[Blaster200boy]

ok guys. I know that the Blaster takes 650cm3 of oil but exactly how much. I'd likes to know Fl. Oz. if possible. I got 1 quart ATF type F trans oil. I know there is a glass but i would rather not dick with looking at it and deciding whats correct.....

 

[blasters/banshees]

650ml i think that means in one leter there is 1000

 

[245stroker]

about 3/4 of a quart. use the site glass and put enough atf in it to get it between the lines

 

[SuperCoop]

This is a good question that has been bothering me for a while. The dealer and bood say .74 so just under 3/4 quart or 750 ml. I also see the 650cm3 on the side of the case and for me, and I have two blasters, anything over 500ml or 1/2 quart puts me over the top of the sight glass. I've been runing 650 ml and no problems so far but would like to know how this is done.

 

[Scott Palmer]

Personally, I put 2.75 cups in there that's = to 650 mL and change so its perfect. I also use Mobile 4 stroke 10w-40

 

[Howard]

22 oz = 650ml