hanging revs

[98blasterworked]

revs are hanging what could be getting stuck in the carb?

 

[craigz9876]

could be a air leak have you done a leakdown test?

 

[Blaner]

if its not an airleak as suggested and its not your pilot jet/screw that is too lean, then it is most likely the TORS assembly ontop of the carb, unscrew the alloy covers and clean up in there! also check your throttle cable for kinks/burns etc

 

[bagds101]

hanging revs are usually a sign of an air leak. i am willing to bet thats your problem

 

[blasterfreek30]

or u need to adjust ur airscrew..try turning it in and see if the revs drop down

 

[98blasterworked]

thanks guys, it was the idle screw ontop of the tors, idk how it would have gotten turned up