9 98blasterworked Member Apr 21, 2010 470 1 44 Hudson Valley Jun 5, 2011 #1 revs are hanging what could be getting stuck in the carb?
craigz9876 New Member Feb 15, 2011 179 1 0 uk Jun 5, 2011 #2 could be a air leak have you done a leakdown test?
Blaner Your Friendly South African Ambassador Mar 26, 2008 3,278 184 114 38 East London, South Africa Jun 5, 2011 #3 if its not an airleak as suggested and its not your pilot jet/screw that is too lean, then it is most likely the TORS assembly ontop of the carb, unscrew the alloy covers and clean up in there! also check your throttle cable for kinks/burns etc
if its not an airleak as suggested and its not your pilot jet/screw that is too lean, then it is most likely the TORS assembly ontop of the carb, unscrew the alloy covers and clean up in there! also check your throttle cable for kinks/burns etc
bagds101 New Member Jul 6, 2010 1,464 16 0 tucson az Jun 6, 2011 #4 hanging revs are usually a sign of an air leak. i am willing to bet thats your problem
blasterfreek30 Member Jan 27, 2008 9,634 129 94 north nj Jun 6, 2011 #5 or u need to adjust ur airscrew..try turning it in and see if the revs drop down
9 98blasterworked Member Apr 21, 2010 470 1 44 Hudson Valley Jun 6, 2011 #6 thanks guys, it was the idle screw ontop of the tors, idk how it would have gotten turned up