Complete top end needs a lil repair

Status
Not open for further replies.

EvilElvis

New Member
Aug 17, 2010
723
5
0
Fayetteville, NC
Complete topend the lower left intake bolt hole ear has 1/2 broken off the fracture seen in the pic seems to be 1 sided nothin serious.... the bore on this cylinder is 66.25mm plenty of life left ....easy fix Im sure comes with reed cage with boysen dual stage reeds and stock carb No slide or needle and intake boot Best offer...not trying to sell junk, if someone has the ability to fix it has many bore lifes... PM me shipping will be $30 I:I

401269_333983519956579_100000348027983_1177179_808438234_n.jpg


398024_333983546623243_100000348027983_1177180_1767107985_n.jpg


378895_333983579956573_100000348027983_1177181_345517315_n.jpg
 
Damn. James is gunna hop on this!

I've already talked at length with EvilElvis about fixing it. It certainly is worth fixing..... considering it's got LOTS of life left in it. I think he's trying to turn it over quick.

Also, I don't need another top end, I traded budget_blaster last month a carburetor for a good top end. I'm set for a while :D
 
hence it needs a little repair and the crack is superficial doesnt go through and through or any further ...the bottom left ear needs to be welded/filled back on and tapped ....sicivic says its an easy fix
 
any repair estimate on this "fix" ????
 
Status
Not open for further replies.