I am parting out my yellow trail bike. Just about all aftermarket parts. ran perfect before this teardown
I am not looking for any trades other than cash. No x box's, paintball guns, pair of nikes, x girlfriend, etc. lol
No tire kickers. If you don't have money do not private message me or inquire about parts.
All parts will come as pictured. I will not be cleaning them up. Sorry but I just don't have the time.
Most items are + shipping unless noted. I accept paypal only and add 3% if you do not send it as a gift. I have been on this forum for 6+ years and have nothing but perfect feedback. If you don't trust me include the 3% fees.
Most of the powder coating is flaking off this bike from road salt in the winter. Most hard parts need re coating or painted.
I will accept best offers via p.m. if you do not like the price.
Let's get started.
I have a complete motor. I will sell whole or will split the top and bottom end.
P.M. me with serious offers and inquiries if interested.
+3 mill stroker, stock bore 66.00 mm top end, flotek aggressive trail ported with boyesen ports added, rechambered head, setup for race fuel. Polished clutch cover, aluminum oil cover, lightened flywheel.
This motor will be complete minus stator. I will do a fresh comp test for the buyer.
Money talks, p.m. me engine, carb, intake......SOLD
Aluminum front wheels with almost brand new dunlop kt tires. Flush mount valve stems for easy wheel flipping. 20x7x10 I believe. $100 + ride
Rear douglas blue label rims, holeshots w 90% tread left, 20x11x8 $125 + ride sold
Banshee axle with brake hub. Needs re coated/paint. $65 + ride
Project blaster Phantom / f7 exhaust. Needs to be cleaned up. No major dents, some minor dings. Comes complete with flange & spring, silencer,pipe. $225 + ride sold
Aluminum heel guards $50 + ride sold
Turner red 7/8 handle bars $25 + ride
MSR adjust on the fly ez pull clutch lever $20 + ride sold
stock thumb throttle assembly with billet cover $25 + ride
front works triple rate shocks with rezzies. springs coating flaking in some spots, but work great. $250 + ride sold
Rear works single rate shock. $175 + ride
Tusk front bumper $40 + ride
Duncan racing rear grab bar $40 + ride
Aluminum swingarm skid plate, Beat up a bit but no broken welds etc. $45 + ride
Burgaard +3+1 a-arms. Comes with matching tie rods but no ends & banshee spindles. Ball joint boots are dry rotted a bit and one ball joint is slightly bent. Arms are in great shape but need re coating/paint. $225 + ride sold
Front hydro wheel hubs/discs, calipers, stainless braided lines, master cylinder. $100 + ride
CFM aluminum air box with K&N air filter and silicon intake reducer for 34mm carb and clamps. $100 + ride sold
Keihin 34mm PJ carb, cel needle, 50 pilot, 152 main. $90 + ride
$100 + ride with throttle cable SOLD
Complete set of Maier yellow race plastics. Race hood, rear fenders cut for cfm air box, gas tank cover, yellow black flamed seat. Small crack in back fenders as seen in the pics. It has never grown or moved on me in 3+ years. Sold complete, will not split. $275 + ride
Complete set of white 03-06 plastics. Brand new maier white rear, used white 03-06 hood, used white front fenders, used white gas tank cover. $250 + ride p.m. pics coming
Pro design 34mm intake manifold. $60 + ride SOLD
Complete 03-06 rear brake setup, comes with 88-02 carrier with a banshee brake boss welded on. Rear caliper with block off, braided line, master cylinder, resorvoir, 03-06 peg with brake pedal. $140 + ride
yfz 450 polished thumb throttle assembly with billet extended lever. $55 + ride sold
New blaster stock amsoil air filter $15 shipped sold
1-1/8" brand new fat bars $35 + ride
Airsal big bore cylinder. Sleeve is broken, needs a new sleeve. $100 + ride
TM Design style Front swingarm chain guide. $30 shipped
03-06 foot pegs and brake pedal $40 + ride
Aluminum frame skid plate with no mounting hardware $35 + ride
Eyeball engineering either +2+1 or +3+1 a-arms ( I will confirm size). Brand new ball joints but some boots are ripped. No tie rods included. A-arms only. Bottom shock mounts were drilled larger by previous owner. I am including a set of bushings and bolts that convert them back to stock blaster size. $300 + ride
03-06 black frame. previously a drag lightened frame converted back to trail. $75 + ride
03-06 grey frame. Great shape. $150 + ride
Message me for misc items. harness, regulator, on/off switch, key switch, rear brake rotor, rear sprocket and hub, coil, etc etc
I am not looking for any trades other than cash. No x box's, paintball guns, pair of nikes, x girlfriend, etc. lol
No tire kickers. If you don't have money do not private message me or inquire about parts.
All parts will come as pictured. I will not be cleaning them up. Sorry but I just don't have the time.
Most items are + shipping unless noted. I accept paypal only and add 3% if you do not send it as a gift. I have been on this forum for 6+ years and have nothing but perfect feedback. If you don't trust me include the 3% fees.
Most of the powder coating is flaking off this bike from road salt in the winter. Most hard parts need re coating or painted.
I will accept best offers via p.m. if you do not like the price.
Let's get started.
I have a complete motor. I will sell whole or will split the top and bottom end.
P.M. me with serious offers and inquiries if interested.
+3 mill stroker, stock bore 66.00 mm top end, flotek aggressive trail ported with boyesen ports added, rechambered head, setup for race fuel. Polished clutch cover, aluminum oil cover, lightened flywheel.
This motor will be complete minus stator. I will do a fresh comp test for the buyer.
Money talks, p.m. me engine, carb, intake......SOLD
Aluminum front wheels with almost brand new dunlop kt tires. Flush mount valve stems for easy wheel flipping. 20x7x10 I believe. $100 + ride
Rear douglas blue label rims, holeshots w 90% tread left, 20x11x8 $125 + ride sold
Banshee axle with brake hub. Needs re coated/paint. $65 + ride
Project blaster Phantom / f7 exhaust. Needs to be cleaned up. No major dents, some minor dings. Comes complete with flange & spring, silencer,pipe. $225 + ride sold
Aluminum heel guards $50 + ride sold
Turner red 7/8 handle bars $25 + ride
MSR adjust on the fly ez pull clutch lever $20 + ride sold
stock thumb throttle assembly with billet cover $25 + ride
front works triple rate shocks with rezzies. springs coating flaking in some spots, but work great. $250 + ride sold
Rear works single rate shock. $175 + ride
Tusk front bumper $40 + ride
Duncan racing rear grab bar $40 + ride
Aluminum swingarm skid plate, Beat up a bit but no broken welds etc. $45 + ride
Burgaard +3+1 a-arms. Comes with matching tie rods but no ends & banshee spindles. Ball joint boots are dry rotted a bit and one ball joint is slightly bent. Arms are in great shape but need re coating/paint. $225 + ride sold
Front hydro wheel hubs/discs, calipers, stainless braided lines, master cylinder. $100 + ride
CFM aluminum air box with K&N air filter and silicon intake reducer for 34mm carb and clamps. $100 + ride sold
Keihin 34mm PJ carb, cel needle, 50 pilot, 152 main. $90 + ride
$100 + ride with throttle cable SOLD
Complete set of Maier yellow race plastics. Race hood, rear fenders cut for cfm air box, gas tank cover, yellow black flamed seat. Small crack in back fenders as seen in the pics. It has never grown or moved on me in 3+ years. Sold complete, will not split. $275 + ride
Complete set of white 03-06 plastics. Brand new maier white rear, used white 03-06 hood, used white front fenders, used white gas tank cover. $250 + ride p.m. pics coming
Pro design 34mm intake manifold. $60 + ride SOLD
Complete 03-06 rear brake setup, comes with 88-02 carrier with a banshee brake boss welded on. Rear caliper with block off, braided line, master cylinder, resorvoir, 03-06 peg with brake pedal. $140 + ride
yfz 450 polished thumb throttle assembly with billet extended lever. $55 + ride sold
New blaster stock amsoil air filter $15 shipped sold
1-1/8" brand new fat bars $35 + ride
Airsal big bore cylinder. Sleeve is broken, needs a new sleeve. $100 + ride
TM Design style Front swingarm chain guide. $30 shipped
03-06 foot pegs and brake pedal $40 + ride
Aluminum frame skid plate with no mounting hardware $35 + ride
Eyeball engineering either +2+1 or +3+1 a-arms ( I will confirm size). Brand new ball joints but some boots are ripped. No tie rods included. A-arms only. Bottom shock mounts were drilled larger by previous owner. I am including a set of bushings and bolts that convert them back to stock blaster size. $300 + ride
03-06 black frame. previously a drag lightened frame converted back to trail. $75 + ride
03-06 grey frame. Great shape. $150 + ride
Message me for misc items. harness, regulator, on/off switch, key switch, rear brake rotor, rear sprocket and hub, coil, etc etc
Last edited:
