Can't get left front wheel nuts loose?

[phragle]

Originally Posted by phragle
to pull the front hubs to check the brakes, throw some grease in there and in the rear, to grease the splines on the sprocket and brake hubs along with the the wheel hubs. not to mention checking the wheel bearings and axle bearings once a season or so.... all reasons for the wheels to come off a couple times a year.

If they are so tight that you cant get them loose they are either

A. corroded
B. Improperly torqued

 

[darederek]

If they are so tight that you cant get them loose they are either

A. corroded
B. Improperly torqued

i would prob have to say that mine were improperly torqued. i couldn't see any corrosion and it was the first time i had mine off since i owned the quad (only had it for maybe a month) and it wouldn't b the only thing that was really tight. and phragle if you don't mind can you go to a thread called maintenance and put down ur list of periodical maintenence. i'm trying to get together a sticky for maintenance procedures that should be done every once and awhile and i know ur the guy to go to. i know i def don't know everything i should do