Long story just rebuilt this year with a 4 mil stroker has lite trail porting Cooled head timing plate so after about 5 min of runnin the rite side stops firing 2/3 -3/4 throttle ?
Long story just rebuilt this year with a 4 mil stroker has lite trail porting Cooled head timing plate so after about 5 min of runnin the rite side stops firing 2/3 -3/4 throttle ?
Had the banshee at east coast atv in February for jetting because I had tour down the motor put on a cool head bigger rad silicone hoses and new seals put a stock air box back on with a k&n power lid( it had already t5 pipe tours eliminated toomy air filter system had a hot rods tried and welded stock stoke ) jetting was done but came to find out the banshee had crank walk ( bad bottom rod bearing ) ran out of money then took it back down to be rebuilt with a 4mil stroker timing plate trail porting
What is your jetting?
310 main jet not sure of the needle but 3rd clip stock pilot air jets and idle air screws are 2-3 turns out I was thinking it was timming