Search results

Alright, I went for it and gave these a try. These are the +3 arms advertised on ebay. (they are actually +1 1/2 each side = total of 3" wider overall). I am very impressed. One thing they don't mention is that they are also +1 forward! Cool bonus!!! They were very easy to install and didn't...

Hey guys, do you all hate the riveted on warning label plates like I do? Have you all drilled out the rivets and removed them, only to be left with 18 ugly little holes in you fenders? I found some cool replacements for those warning plates that add a bit of fun/swag to the fenders! You can go...

Not sure if this has been posted before, but I thought I would share what I came across in a 400ex owners manual. A lot of us buy used 400ex rear shocks, but have no idea where the previous owner set the compression and rebound screws to. This info is to reset the adjustments to factory stock...

What are your thoughts on these? Yamaha Blaster 200 A Arms Chromolly Plus 1 1 2" Each Side Alba Racing | eBay :-/

Okay, so I haven't quite yet gotten the Blaster fully broken in yet, but I have had some time to do a little tuning. On my airscrew, I initially set it to 1 1/2 turns out. After warming the engine fully, I set the idle above normal (around 2000 RPM) and started adjusting the air screw. I achieve...

Hey guys, any idea if these would work on a blaster? Yamaha Banshee Foot Peg Extensions Sharp Widened Extended Footpegs with Kickup | eBay

Just wanted to share pics of my KOR experience...........I know how much we all love pics of this sh*t!!!!! So here they are! Hats off to Ken! He put up with all of my e-mails and anxiety -and- sent me a masterpiece! Ken has a customer for life!!!!! Did I mention his prices are unbeatable...

So, here I am (impatiently) waiting for my head and cylinder to get back from KOR. My question is - when I get them back, is there anything special I need to know about assembly like deck height? Ken is porting my cylinder and doing his head rechamber. :-/ Also - What kind of performance...

Hey guys! I currently have my cylinder and head with KOR getting ported & head rechamber. My question is, when I'm due for a bottom end, can I put in a 3mm stroker without having to buy another cylinder due to the porting for the stock crank? OR......can my existing port work be modified to work...

30mm D Slide Carb for Yamaha Blaster | eBay Will this be a good carb. I currently have my cylinder & head at KOR for some porting and rechamber, also bore/hone. Wondering if this would be better than the stock 26mm?

Hey guys, I tried posting this in my old thread about engine noise, but it was old enough that no one was reading it anymore. So, here it is.........My Blasty started making a lot of engine noise. Is this piston slap? If so, I will get the top end off ASAP and get it out to KOR! I wanted to get...

Okay.......I know this has been gone over many times, but in my search I haven't found a definitive answer....... So, everyone says that Blaster engines are notoriously noisy. Since I haven't had the chance to be around another Blaster yet, is the noisy crankcase when running normal. It's not...

Okay....I finally got an album made with a couple pics up of my Blasty! She ain't pretty, but she's a fun ride!I:I

So, I have read many posts here about steering stabilizers being the bee's knees, however most of the posters seem to primariliy ride trails. I 95% ride sand/dunes. Would a stabilizer be of any benefit to me, or should I save my money for other cool add-ons? Thanks

Ok, so I know this has probably been gone over too many times, but I'm a Newbie so I have to ask........ What is the best way to go in a 240 kit. I have heard that the Vito's is the cheapest, but also not very good quality. I looked at getting an LA sleeve and sending my cylinder to KOR to...

Hey guys, this is what I'm used to, so if I sound like a total newb when it comes to quads/Blasters this is why.........

I recently saw a post here that Kevin O'Connor Racing is making an aluminum case saver for Blasters, however now I can't find it. I shot Kevin an e-mail asking if he is still offering them as they are not listed in his online store. Does anyone know if he is still making them?

Okay, so when I bought my Blaster it had a DG front bumper on it. My problem is one side is bent back about an inch. Any ideas how to get this thing bent back straight, or am I stuck with a bent bumper for now? Thanks!

I have been considering buying the CFM airbox. What are the pros/cons of this unit? Also, what am I going to have to do with my jetting? I currently have a 290 main, Blue needle in the middle, FMF Fatty/Turbine core 2, Boysen reeds, +4 timing mod, Bone stock engine/carb. Thanks.........

Hey guys, I have been lurking here long enough so I decided I better join! This forum has been a huge help as I am brand new to Blasters! Thanks for having me!!!I:I