what size sprocket do you run

mr_3_0_5

Member
Nov 21, 2008
4,630
55
90
43
in a small quiet town
im running a 14 in the front and a 40 in the rear.. anybody running smaller in the rear cause i dont think i can go up in the front. its already halfway through my chain slide.
 
does nobody hear have thier bike geared?? hate to break it to you guys but gearing is everything.. i cant believe you guys dont know what your running.. if you wanna wake up ur bike throw a sprocket on it and thank me later..
 
Last edited:
im at 14/40. only fit a 14 on front its basically hitting now but u can down down to a 38 in the back if u need to.
 
I could actually probably go with a 36 or 37 tooth on the rear or a 15 on the front. With my mods and my gearing I can pull the front end off the ground in 5th.
 
ohhh yea.. im gonna try to get a 15 up front.. and try a 36 rear and see if the bike has enough power.. im at 40.7 hp. so i think it wil do it just fine.. another dumb ? if i wanna put the chain gaurd back on wil it fit with a 15 ??
 
Last edited:
I run a 13/40-14/40 i would like to go to 14/38
I ride with a guy that runs a 14/45 he wants to get a 48 ???
 
45 rear is WAY too low for a blaster. whats the point in that besides a useless 1st gear and 6th gear wheelies? that will give you about a 30mph top speed.

14 front is the biggest size that will fit up there.

with a stock ratio, its geared WAY too low as it is. besides a 100-200 yard drag race, i can see how anything lower will be beneficial at all.
 
i have a brand new 15 tooth sprocket that i didnt use, its alittle too close to the case for me, and u have to mod the cover, 15 bucks takes it