Recent content by brianfulcher15

I went ahead and ordered a yz kill switch, and a harness. For what they cost its a great quality product. We got hit by snow, so havent be able to do anywork on the blaster this weekend. Hopefully it'll warm up some next week. If i can get it running, im going to goahead and order the...

what is sellers name?

I may be interested in this, i was trying to send a PM but I cant figure out where the link to do it is on the site now. I'm going to give it another compression test this weekend to make sure thats still good, and I think im going to go through the wiring harness and eliminate all the wiring...

The stator and voltage regulator is the only parts I have not replaced. This weekend I'll see if i can get my wife video the spark when i kick it. I know in the past it did not have the blue color most people say they are supposed to have but it did spark. also its a 4 wire stator

Just went out and checked looks like its a 4 wire.

IM doing research on this now, but could you tell me how to identify this? Im thinking its a 4 wire since 1bad442 said the harness he sold me was running the engine as well. and it was a pre 03 motor and harness

hey guys forgot to mention the tors system has been removed from the blaster.

I would but I don't have the Stock carb. Does anyone know if the 30mm oko's intake fitting is actually the same size as the 28mm kiehin pwk? I bought the oko's back then because they were about 100 dollars cheaper than the kiehin 28mm was. I may could swing for one now though as long as the...

The compression was good 135psi. Specs best i can remember are Bored .2 over wesco pistin Reed spacerfor clearence reasons Fmf fatty and salincer Favtory 7 air box Jets installed i think were 40 and 45 ill verify that tomorrow Vforce 3 reeds I bought my wireing harness cdi and coil all from the...

Hey guys, Im ready to start my blaster project back up again, and need some advise. I gave up a while back due to lack of money, and frustration, and life changes (kids), but I have a 2002 blaster. The motor was a fresh rebuild using a oko 30mm carb. Im also using vforce 3 reed valves. I...

its the fmf fatty pipe, with the powercore 2 silencer.

ok looks as though the key is good.... I guess its time for me to call it quits and just take it to the shop to be fixed .... i have lost all confidense that im going to be able to fix this... Eletronics are good... psi is good leakdown is good gas mixed 32:1 48/150 jets Flywheel key...

ok so thats good then... :( back to my original thread and trouble shooting it more :(

ok i finaly got it... is the flywheel key this half moon looking thing? and can someone tell me what part is the actual flywheel? maybe its from workign on cars, but i was expecting something with teeth on it?

here's a link to the puller i bought does the washer have to come off before you try to use the puller? thats the only thing i could think of that may be messing me up, unless the puller i recieved is not the size tis suposed to be. *FLYWHEEL PULLER* YAMAHA BLASTER 200 YFS200 YFS *88-06*...