I am new to atv's. Just bought a 03 blaster. was riding perfectly fine and then it stopped running. took apart carb and cleaned it, main jet is 230 pilot is 35, It turned out to be a broken reed. replaced with boyesen power reeds, put everything back together and may have stripped tors idle screw because idle climbs out of control when started and you have to kill it, I noticed that the tors throttle cable doesnt allow the carb slide to fully seat, maybe 1/2 inch from fully seated. Also keep turning idle screw counter clockwise and it does nothing. air screw alll the way in helps take it down for the most part but still to high and not right. Help please, I dont believe there are any air leaks
Full fmf pipe, boyesen power reeds.
Full fmf pipe, boyesen power reeds.