Yamaha Barnett Carbon Fiber Clutch Pack

[2001BlasterKiid]

I might go pick one up for $60 dollars, are they good clutch packs? So will it be worth my money?

 

[Surfrjag]

I used one and it worked great.. does it come with the hd springs?

 

[super noober]

is it new? used? complete? i run a barnett dirt digger kevlar clutch and its amazing, u wont have to worry about your clutch slipping thats for sure I:I

 

[2001BlasterKiid]

Its brand new comes with everything still in the original package

 

[Surfrjag]

the best deal would be to get yourself a set up hd springs and remove the wavy ring out of your clutch pack. but if your clutch is toasted then go ahead and get the kit...

 

[Ron Strecker]

Problems with barnett dirt digger kevlar clutch.
Cost too much.
Will cause slipping.
Takes too much clutch spring pressure.
If clutch slips. Kelvlar burns up too fast.

The best clutch fibers are the Yamaha 1000cc motorcycle fibers.

All the atv asphalt drag racers use the Yamaha 1000cc fibers.
Most atv asphalt drag racers slip the clutch for fast 60ft times.
The cork fibers work great with a lockup.

Yamaha part # 4H7-16321-02

I slip my clutch for the first 15-20ft. Then the lockup starts working.
I use only 4 stock clutch springs.
I can get over 60 8th mile passes on one set of Yamaha 1000cc fibers.

 

[Prime]

Problems with barnett dirt digger kevlar clutch.
Cost too much.
Will cause slipping.
Takes too much clutch spring pressure.
If clutch slips. Kelvlar burns up too fast.

The best clutch fibers are the Yamaha 1000cc motorcycle fibers.

All the atv asphalt drag racers use the Yamaha 1000cc fibers.
Most atv asphalt drag racers slip the clutch for fast 60ft times.
The cork fibers work great with a lockup.

Yamaha part # 4H7-16321-02

I slip my clutch for the first 15-20ft. Then the lockup starts working.
I use only 4 stock clutch springs.
I can get over 60 8th mile passes on one set of Yamaha 1000cc fibers.

Good info!! Have some rep.

 

[Larry's Shee]

that's nice but they don't fit a Blaster clutch

 

[Ron Strecker]

I use Walmart brand Type F tranny oil.

 

[Ron Strecker]

that's nice but they don't fit a Blaster clutch

Than use the stock blaster clutch fibers.
The cork is the same as the 1000cc fibers.
Just the 1000cc fiber pad is bigger.