my work in progress - 1987 Quadzilla, running log
EDIT: going to just make this thread my running log about my Zilla
*Suzuki Content*
I've been collecting and preparing some more parts for my Zilla for a while now, decided to start working on the quad again today.
Pulled the engine out a few weeks ago to clean it up and install HD clutch, new reeds, new topend, etc...
Heres how it started out
and after some paint, new parts and a little clean up it looked like this
Went over to my cousins house and pulled the roller out and went to work
30 minutes in, the engines back in, bars off, old switches, etc off
Installed my new DR.Q Pipe, Tusk YZ High Bend Bars, D.I.D 520 X-Ring Chain, case saver, new sprockets, etc..
I'm going to finish putting it back together on Saturday morning, I need to cut my front fenders too now as the fender bracket does not fit with my new pipe.
Here's my Zilla's new food of choice
Parts added/installed this go around:
Pro-Design Cool Head with 57cc Dome
Cometic High-Comp Copper Headgasket
TUSK YZ High Bend Handlebars
D.I.D 520 ATV Racing X-Ring Chain
Primary Drive F/R Sprockets 14/40
DR.Q Pipe
Boyesen Dual-Stage Reeds
UNI 5inch Clamp-on Filter with Outerwear
New OEM Clutch with 85 LT250R Super-Heavy Springs
87.5mm Wiseco Piston
Will have more pictures saturday and hopefully a video of the new setup running!
EDIT: going to just make this thread my running log about my Zilla
*Suzuki Content*
I've been collecting and preparing some more parts for my Zilla for a while now, decided to start working on the quad again today.
Pulled the engine out a few weeks ago to clean it up and install HD clutch, new reeds, new topend, etc...
Heres how it started out
and after some paint, new parts and a little clean up it looked like this
Went over to my cousins house and pulled the roller out and went to work
30 minutes in, the engines back in, bars off, old switches, etc off
Installed my new DR.Q Pipe, Tusk YZ High Bend Bars, D.I.D 520 X-Ring Chain, case saver, new sprockets, etc..
I'm going to finish putting it back together on Saturday morning, I need to cut my front fenders too now as the fender bracket does not fit with my new pipe.
Here's my Zilla's new food of choice
Parts added/installed this go around:
Pro-Design Cool Head with 57cc Dome
Cometic High-Comp Copper Headgasket
TUSK YZ High Bend Handlebars
D.I.D 520 ATV Racing X-Ring Chain
Primary Drive F/R Sprockets 14/40
DR.Q Pipe
Boyesen Dual-Stage Reeds
UNI 5inch Clamp-on Filter with Outerwear
New OEM Clutch with 85 LT250R Super-Heavy Springs
87.5mm Wiseco Piston
Will have more pictures saturday and hopefully a video of the new setup running!
Last edited: