Will I need to do any Rejetting with this V Force Reed Setup?

[XSkater2099]

I just won an ebay auction for a used set up Vforce reeds for the blaster and i am wondering if i am going to need to do any re jetting to my current set up which is running perfect right now.Reeds I just Bought

Setup:
Vitos +3m Crank
FMF Gold Series with Power Core 2
K&N Filter no Lid
330 Main jet

I previous was running Boysen Dual Stage reeds in the stock cage

 

[brandoz28]

check it for sure, you may need to go up another size on the main

 

[XSkater2099]

the only other size jet i have is a 340, that seems much for the summer weather, but i can always give it a go

 

[brandoz28]

i'd put them in and then do a plug chop to see if you do need to rejet or not

 

[xJust_Causex]

damn you got a pretty sweet deal there.

 

[blasterfreek30]

moto tassanari states that rejetting is NOT required with the v force setup..............but check ur plug just in case

 

[Iconic]

I did not re-jet for my VForce 3's that I recently installed. I have a Toomey exhaust with their jet that is provided and a K&N Filter. Seems to be running perfect.

 

[XSkater2099]

Thanks guys, ill run it and give it a plug chop to see where I stand. I only have a 340 main left in the kit I have, can I get larger ones if I need to? The weather is getting hot and humid now so I'm sure its going to make an impact on the jetting anyway. It did seem to want to die at idle, prob going to have to tweek the pilot jet as well, I think its currently at 1-1 1/2 turns now.