What am I missing

[maddmaxx]

2001 Yamaha blaster, I just replaced the rear brake cable with the conversion kit and now my bike wont start , it ran beautiful until now, am I missing anything here? Thanks, Max

Yes, I have fuel and spark...wtf, frustrated...thx all

 

[Larry's Shee]

I don't know if it has a switch on the bar lever for the brake system, but disconnect the TORS brain, 3wire plug under the hood.
Even if that doesn't work, leave it unplugged, the system causes all kinds of weird problems.

 

[maddmaxx]

I don't know if it has a switch on the bar lever for the brake system, but disconnect the TORS brain, 3wire plug under the hood.
Even if that doesn't work, leave it unplugged, the system causes all kinds of weird problems.

Still nothing, I am at a complete loss, I can smell it loading up on gas but it just won’t start, how frustrating ....Changed out the plug and checked for spark, everything is good, I appreciate the help, Max

 

[Larry's Shee]

Check that flywheel key isn't sheared

 

[maddmaxx]

Check that flywheel key isn't sheared

I’ll check it out, thanks for the help

 

[DLStryker]

Check the stator with an Ohm meter. Mine was not too far out of spec, but when I replaced it the thing fired right up. So "close" is not good enough on a stator.

 

[Larry's Shee]

I’ll check it out, thanks for the help

Be sure to ONLY use a Blaster flywheel puller. No 2 , 3 jaw pullers. NO hammer/prybar sh*t.