Urgent Help Please!!!!

[Aaron-46]

I have recently been racing my blaster and it had an issue with the throttle sticking, so we fiited and tors elminator kit,fmf system and reed spacer, also wiring stripped for racing and yet it continues to stick and we have noticed it only happens in the wet :-/ :-/ and im meant to be racing next weekend

Aaron

 

[brandoz28]

lube your cable, and make sure that the slide is in the right way

 

[DReeds]

is ur throttle line lubed up? spray a lil silicon spray or wd-40 in the cable and let it run threw..or you might have a kink in the line...and if all else fails...clean the throttle control..take it apart..spray it all out with some degreaser or carb cleaner. should be good to go.

 

[blasters/banshees]

most likly it just a kink in the throttle thats what happen with mine

 

[rideyamaha09]

Check and lube your cable for sure. I'd also check the carb slide to make sure its in properly and not dirty or rough or anything.