siezed trans bearing

[01BLAST3R]

hey guy i need help asap.. im fixing this motor for this guy he apparently ran it hot with no trans oil and the small bearing on the srpocket set of gears is seazed and im havein truble getting it out and suggestions on getting it out?

 

[scotj77]

this is a bearing you can't get to the back of right..... you can try heating the case from behind and see if it will fall out. if not you would have to weld some sort of puller to it. I tried using a modified 3jaw puller on it and broke the ends off of it bc i had to grind them so thin to fit behind the bearing

 

[01BLAST3R]

well see the trans is seazed in there with it. lol ive got the drum and shift arms out.. just cnat get the tranz out the one im talkin bout is on the right side case..

 

[Larry's Shee]

You can't even get shaft out of bearing? Clutch or sprocket shaft?

 

[01BLAST3R]

i got it thanks alot i had to heat the bearing then beat the shaft out of the bearing then pop the bearing out thats alot guys..