Raptor 50 low speed

oldschoolyfs

New Member
Dec 7, 2015
8
0
22
46
Hello.
Does anybody have any experience with a Raptor 50? I bought one for my 4 year old godson. The chassi is great and the quad is very good looking, but the engine rev limiter keeps kicking in at a very low speed. Even the Chinese quads with the 50cc four stroke are way faster than this. The kid is getting bored.
Anyone with ideas?

Thanks.
 
Is there a throttle limiter installed on the thumb throttle assembly?
 
sounds like you'll need an aftermarket CDI, or bypass the CDI rev limiter, and rejet the carb ?..........


http://forums.off-road.com/youth-atv/201713-raptor-50-80-performance-mods.html

http://www.raptorforum.com/forums/74-raptor-90-80-50/29561-need-more-speed-raptor-50-a.html

http://forums.off-road.com/youth-atv/201713-raptor-50-80-performance-mods.html







this: http://www.amazon.com/dp/B0055E0GNC/?tag=jyj356j5-20

Most Helpful Customer Reviews
Noticeable performance boost to Yamaha Raptor 50
By Bizman on September 15, 2014
Verified Purchase
I rode my little cousin's Yamaha Raptor 50 and it was a complete dog. No acceleration, no throttle response and no top end. The thing would drive around the yard at 6 mpg bouncing of the rev limiter. It couldn't even get out of its own way. I would seriously push myself along with my foot like riding a scooter. The quad sucked.

I did a little research on the interwebz. First, I cut the carb slide and modified the thumb throttle to allow for 100% wide open throttle. Factory, the baby 50 is limited to about 50% throttle. No real improvement. Next, I opened up the clutch housing and removed 4 of the orignal 12 metal clutch balls. Noticeable improvement in throttle response. Now, the engine revs up a bit before the centrifugal clutch engages. The machine will actually slightly pull from an incline at a dead stop. I may later pull out another 4 balls and see what that does. All this was nice, but top speed was still painfully slow and that darn bouncing rev limiter!

Ordered and installed this ProComp CDI / Rev Box. WOW!! Night and day difference. The engine rev limiter has been raised and something feels like the ignition timing curve has been altered. The "Little 50 That Could" became a little BEAST screaming around the yard. A blip of the throttle will now break loose the rear tires. She'll now easily power slide around corners. Not GPS verified, but it feels like top speed has doubled and I'm thinking final gearing &/or tire size is the only thing holding her back from more. I may invest in slightly larger tires, drop down to four clutch balls to try and squeeze another few MPH out of the Little Blue Rocket.

Plug and play installation. Dollar for dollar, best mod for your quad.