Pipe vibrating bad

[Blasterdude27]

What could be causing this?


rattlingpipe.flv video by Jarred27x - Photobucket

 

[blasterboy91]

i cant get the vid ta play...

 

[stephen12091985]

that sounds more like the motor to me

 

[Blasterdude27]

Watch the pipe you will see it vibrating................

My guess would be the mount were it bolts to the frame but its not cracked.

 

[blasterdude14]

have you rode it? check your compression to make sure its not your motor

 

[Blasterdude27]

have you rode it? check your compression to make sure its not your motor

Oh yeah i went for a nice rip just a while ago. comps great, sounds great. If you watch the vid you can see the pipe moving, i'm not worried about a sound or anything like that.

 

[blaster01]

yes i can see it viberating...quit badly.......but i cant think y it would be doing that

 

['blanshee'man]

The top mount isnt dry rotted or anything? my pipe turns when i rev it but not like that

 

[03blasteryfs03]

its the top mount bud

 

[Blasterdude27]

The top mount isnt dry rotted or anything? my pipe turns when i rev it but not like that

The original bolt was lost but right now I'm using another one.... maybe its just a little too small and thats whats causing it?

 

['blanshee'man]

It could be, hmm how are the mounts on the silencer?

 

[The Ox]

I have a couple of pipe mounts for sale. Thats what it looks like to me. Make sure the bolts are tight up there too...

 

[liljatownboy]

maybe your springs are getting streatched out and time for new ones

 

[1995blaster]

make sur it monted good and if it is its your motor

 

[tyler1blaster]

What could be causing this?


rattlingpipe.flv video by Jarred27x - Photobucket

i have the same noise on my blaster... except i have a stock pipe. maybe the valves, mounts, or that bolt thats to small????

 

[NOVIS]

i would just make sure all the bolts are tight and that there the right size

 

[sev]

no its none of that. mine did that to. where the silencer bolts to the grab bar in the back. get a chunk of metal with a hole in it and put it between the silencer and grab bar when you bolt it on. if you need further help pm me and ill sen you some pictures of what i did. it really helped alot.

 

[Blasterdude27]

Thanks for all the help, turns out it was the top mount. the bolt was too long and the head was too small. The flange was leaking too. fixed both of those problems last night.

 

[danyoung582]

my motor sounds the same way, my springs on mine viberate a little bit. but other than nothing. check all you mounts

 

[blasterfreek30]

i have the same noise on my blaster... except i have a stock pipe. maybe the valves, mounts, or that bolt thats to small????

did u say mabe the valves



that hurts to hear that lol