Pics of 400ex shock install

[specialized7]

 

[boardmaster272]

oooo ok!

 

[2smoker85]

so i take it it doesn't match right up, how much fab is needed, i want the 400 rear shock or the works rear shock.

 

[boardmaster272]

it doesnt need mutch u need to drill the bottm holes of the shock out so the bottom pin can fit then get a diff sleve or drill it out to fit the top bolt in its not that hard to put in

 

[Unstock240]

The bearing wasn't in very tight. I just took a piece of wood and it came out without much effort at all. The install is easy if you can use things like a drill and a measuring tape, not much involved to me.

 

[chrisroberts916]

very nice installation and photos con8quest6. I just bought my shock monday off ebay hopefully I'll get it for the weekend. some say you have to trim the airbox, is that true?

 

[fatboytank320]

Will this work with the stock swingarm?

 

[specialized7]

scroll to the top of this page, i have a stock swingarm which you can see, and i have a stock airbox with the lid on it

 

[fatboytank320]

Cool, thanks for the quick reply...

 

[jeff1005]

Will drilling out the bottom of the shock weaken it much??Or would it be better to use a bolt that fits the botoom hole of the shock with spacers?

 

[yz360]

do you guys have any good pics of the air box being trimmed jw i dont think you need to take much off right and what did you use to trim it?

 

[tjsdaname]

you dont even have to trim it

heat and bend....

 

[yz360]

shiz never thought of that lol i was thinking to hard