ok tired of messing with it

[rgpannell]

Sooo I've bout had my belly full messing with this keihin 34mm pj. I can't get it to idle at all. So I'm thinking about going with a 34mm mikuni so I don't have to change my intake and all. Could anyone give a recommendation to what carb exactly and what jetting to start off at. I'm running a cfm aluminium air box, ken occonor trail port, slight bore, boysen reed. My elevation is around 600 ft above sea level . Also running a fmf exaust.

 

[Larry's Shee]

Can't help with your Q, but was this a new carb that you can't tune?

Not a great price:b MIKUNI 33mm Banshee atv LEFT carb carburator 1987-2006 | eBay

 

[rgpannell]

no its a used carb but i rebuilt it. I talked to awk08 and Ken occonor and I think I am gonna try a couple more things before I completely give up on it lol. Thank you Larrys shee for the look up though. Ill keep that carb in mind

 

[Larry's Shee]

No problem, actually stumbled acrossed it yesturday. Had to laugh cause other than stock carbs, there is no left and right carb for Banshee.

Reason I asked new/used cause something might be worn or jacked.