Oil pump

Discussion in 'Engine' started by Tcustom, May 15, 2019.

  1. Tcustom

    Tcustom Member

    Joined:
    Apr 30, 2019
    Messages:
    15
    Likes Received:
    5
    Trophy Points:
    45
    Gender:
    Male
    Occupation:
    Welder fabricator
    7314A600-E1C2-420A-B297-DEDE1F9A5007.jpeg E5FF9BEE-2376-4AE6-BE17-12A42671B539.jpeg I no longer have the self oiling system can I block off the pump. And would you suggest replacing the clutch basket waste mine is folded over.
     
  2. bummer981

    bummer981 Powered by Smoke & Mirrors

    Joined:
    Mar 1, 2011
    Messages:
    1,681
    Likes Received:
    168
    Trophy Points:
    122
    Gender:
    Male
    Occupation:
    Mason
    Location:
    Rochester, New York
    Block off the pump and be sure to block off the nipple on the carb. That washer is supposed to be bent over to keep the nut from backing off.

    now look what you did you made me say nipple, bent over and nut all in the same post.
     
    Awk08, Blaaster and Tcustom like this.
  3. Tcustom

    Tcustom Member

    Joined:
    Apr 30, 2019
    Messages:
    15
    Likes Received:
    5
    Trophy Points:
    45
    Gender:
    Male
    Occupation:
    Welder fabricator
    Lol dang, only thing I didn’t make you say was, just the tip. Ok thanks for the info, I should have known that about the washer but I just want to make sure.
     
    Awk08 and bummer981 like this.
  4. Blaaster

    Blaaster Moderator Staff Member Technician

    Joined:
    Jul 18, 2011
    Messages:
    15,383
    Likes Received:
    1,088
    Trophy Points:
    165
    Gender:
    Male
    Occupation:
    Pensioner
    Location:
    eastern australia
    If you are going to leave the pump in place you should remove the plastic drive gear..
     

Share This Page