Hey,i am travaling to mexico soon and want to take the bike my mods are 35mm mukuni carb, .20 over weisco piston,no air box lid, full fmf pipe,block off kit runing 32:1I:II:I
Need help jeting for Mexico Trip
- Thread starter blasterfast
- Start date
Need to know your current jetting, elevation, avg. temps, and if where you ride is humid, dry, or inbetween. Will need same info on where you you will ride. Also be aware fuel may be of lesser quality/octane.
hey, i have a 300 size jet in it right now and the filter is a pro flilter foam and its rocky point mexico
#300 - #310 should be ok depending on temp and elevation.
Take one size either way and plug chop when you arrive.
Take one size either way and plug chop when you arrive.
Last edited by a moderator:
make sure you take your registration. Also remember that if you eat sh!t, Mexican medical care is a little different than here and you will be expected to pay on the spot. Di not jeep all your money in one place. If you het hassled by mex cops, be prepared to pay fine/bribe on the spot, however the amount is negotiable usually. Do not (even in the middle of nowhere) leave anything out you don't want stolen.
