Jetting question

[speedemon17]

Wat would be a good jet for a blaster with a vitos 240 kit and fmf exhaust boyessn dual stage reeds,1/2 inch spacer i think, 35mm keihn pwk, SMS aluminum airbox with huge intake where the air filter go's in andalso 240 is bored over if that helps and 35mm manifold. All helP is appreciated thanks, marcus

 

[Whitty21]

no clue on what size, but all the pwk's take the same jets

 

[Triple_B]

Hmmmmm maybe 160 range...

 

[speedemon17]

It's a keihn not a mukuni a 340 would be like not even having a jet in the quad it has a 145 in it now

 

[245stroker]

start about 155. I'm running a 150 in my 35mm airstryker and 46-52 pilot. Those should get you close

 

[Triple_B]

It's a keihn not a mukuni a 340 would be like not even having a jet in the quad it has a 145 in it now

o wooops i didnt see the carb size just saw the mods sorry bout that... then like start around 160 or sumthing

 

[speedemon17]

It's alright I understand

 

[hudack]

well if its already got jets in it mabey you should get out there and do some leg work by doing plug chops first. and then go up and down as needed only way to get jetting right is plug chops not from what other people are runing