Idle

[langlais23]

Where is the idle screw on my blaster. Mine won't idle because it is to low and it just stalls unless I work it down for about 5 minutes. I appreciate any help in advance

 

[tbrooks]

Under the seat on top of the tors

 

[langlais23]

Not trying to sound like an idiot but what is the tors...I'm pretty new to atvs

 

[Awk08]

the stock idle screw is located on the tors box on top of the carb, accessed under the seat, look under the rubber flap right under the back of the fuel tank, nickel sized screw w/ straight blade slot.

you may also want to:
clean/reoil your air filter
clean your carb:http://www.blasterforum.com/threads/how-to-clean-your-carbureutor.254/unread
check float height while in there: http://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/
check your airscrew setting:http://www.blasterforum.com/threads/adjusting-your-airscrew-pilot-jet.51060/

all above can effect idle

 

[langlais23]

Alright thanks

 

[langlais23]

Is this the idle screw

 

[Awk08]

Is this the idle screw

sure is

 

[stacypfingsten]

Eureka I found it.

 

[Blaaster]

Elusive little beggar isn't it!