High Rev!!

[Logan fuller]

A couple months ago my blaster was reving up reallllll high!! it was like the throttle was wide open at times and when you would pull the clutch all the way in it would begin to rev up also! So i took it and the guy adjusted the carb. and it was running perfect and not revin up, today i get on it and each time i pull the clutch in it revs up! but if i like only pull it half way in it wouldnt do it! And also when i pull the clutch all the way in i have to hold the brake or it tries to pull off!????? Help me please! sorry soo long ahaha

 

[Awk08]

leakdown test required asap

 

[Demo4o1]

ure needle is prolly bad.. adjust it to one clip up to lower it(should be in the middle depending on ur mods). i had the same prob 1 time. when that happens, IMO, u rev it, the needle comes up and doesnt line back in the hole causing it to get stuck and rev super high.

 

[blasterbuddy200]

its definatly gotta be a air leak, like awk said take a leak down test and report back

 

[bagds101]

high rev usually is an aie leak

 

[toytech]

air leak, blown gasket or flywheel side seal proly, don't run it until you get it fixed

 

[Logan fuller]

alright guys thanks alot ill let yall know how it goes!