Help! No idle!

[rgpannell]

ok so I finally got my motor back in my blasty and everything hooked back up. With a little throttle it fires right up. It revs up just like it should. But it will not idle at all if I let completly off the throttle it dies. I tried adjusting the air mixture screw didnt seem to change anything.

 

[yb200]

what about the idle adjustment under the seat

 

[yb200]

did you hook the plug back in to the tors on the carb

 

[Blasterdude27]

Is your parking brake removed? If so make sure you dissconnect the sensor from the cdi box, mine wouldn't idel because of that... drove me crazy lol. Also make sure your idel is high enough.

 

[rgpannell]

I have no brakes lol so I will check that sensor how I go about that? Also I didn't mess with the tors at all I just took unscrewed it with the sping and needle off the carb and left it hangin. And I did try to adjust with the throttle stop screw and the air mixture just like my manual said but I cant get it to idle at all

 

[rgpannell]

bump ^^^^^^^^^^^

 

[rgpannell]

Could it be the tors messing me up?

 

[rgpannell]

umm a little help plz!