M mitchellrj1988 Member Aug 22, 2010 111 0 42 ROC ny Oct 14, 2010 #1 I was greasing up my chasis on the blaster today and i broke one of the grease fittings. any one know where i can get some of the fittings?
I was greasing up my chasis on the blaster today and i broke one of the grease fittings. any one know where i can get some of the fittings?
M mitchellrj1988 Member Aug 22, 2010 111 0 42 ROC ny Oct 14, 2010 #2 nothing......lol i thought it might be a common occurance
acezeesawtooth Member Aug 8, 2010 1,927 32 84 35 Indiana, PA Oct 14, 2010 #3 ive never heard of it happening. umm which one was it... i dont know where you could buy new ones. but could you possibly just buy a used a-arm instead
ive never heard of it happening. umm which one was it... i dont know where you could buy new ones. but could you possibly just buy a used a-arm instead
M mitchellrj1988 Member Aug 22, 2010 111 0 42 ROC ny Oct 14, 2010 #4 yea it was the front one by the a arm...
darederek Member May 31, 2010 1,936 30 84 Greensburg Oct 14, 2010 #5 you can buy them at a hardware or auto parts store
99Blasty New Member Jun 17, 2010 100 1 0 Virginia Oct 14, 2010 #6 yea man u can get them at any auto parts or hardware very simple and cheap to replace
M mitchellrj1988 Member Aug 22, 2010 111 0 42 ROC ny Oct 14, 2010 #7 ok good its just gunna be a tight space to tap it out
9 98blaster+4 Member Oct 12, 2008 2,131 20 74 vermont Oct 14, 2010 #8 depending on how bad it is it should just unscrew from the arm , then you just screw the new one in the hole
depending on how bad it is it should just unscrew from the arm , then you just screw the new one in the hole
ROAD RUNNER New Member Sep 3, 2010 432 3 0 30 Michigan Oct 21, 2010 #9 Yup they just unscrew out of the hole, though it may be tricky with it being broke off. Just screw the new one right back in.
Yup they just unscrew out of the hole, though it may be tricky with it being broke off. Just screw the new one right back in.
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI Oct 23, 2010 #10 Might need easy out to remove. Buying a new arm is the dumbest , most retarded answer I've heard in a LOOOONG time !! You're sofa king we todd did.
Might need easy out to remove. Buying a new arm is the dumbest , most retarded answer I've heard in a LOOOONG time !! You're sofa king we todd did.