Got a leak Need advise

[dnoftz]

Ok got my motor done and did a leak down and bam I have a leak its leaking right where the jug and case comes together in the back, Tried loosening the nuts and re torqing them but just leak more.

So my question is this. Can i take some Yamabond and put it on the case then put the gasket back down and re torque? Or do I have to get a new gasket and try again.

 

[harley1-5]

I would get a new gasket and do not use a paper gasket I would only use cometic or oem

 

[Awk08]

/\ that !
with a small brush of case bond, front and back where the case split is

 

[Reaper26]

ive just used the yamabond on the base before, seals great, and slightly lowers compression.

 

[dnoftz]

/\ that !
with a small brush of case bond, front and back where the case split is

Ok so it will be ok to use a little case bond on it where the case splits are? Thanks