Fuel upgrades

[Kennedy_Power]

I suggest that all who run a carb bigger then a 30mm, remove the stock Blaster fuel valve and replace it with a Banshee fuel valve. The valve is located on the tank and the banshee has the same bolt pattern. I also suggest any Big bore blaster set up above 42hp to use a fuel valve made by Power-Flo™ Fuel Valves
I sell the banshee valves at 30.00
I have other recommendations to those who run methanol, PM me on that set up
Thanks

 

[yb200]

so i should get a shee petcock then?

 

[Kennedy_Power]

Yup, people blew up their engines all the time from lack of fuel to the carb
Once the engine is set up for meth, a fuel pump is a must

 

[yb200]

is that 30 shipped?

 

[Braaaptor]

A 'shee fuel petcock will flow much more fuel than the stock one that comes on the Blasty. This is significant, because a large aftermarket carburetor often requires more fuel than is able to flow from a stock petcock.

In some cases, people running these 30+ mm carbs fed by a stock petcock will suffer fuel starvation problems, since the carburetor's thirst for fuel can outstrip the supply available from the tank. This condition can be deadly for the engine... Since 'Shee petcocks are designed to feed 2 carb's at once, they flow much better and will work OK on heavily modded Blastys...