Front hydro conversion brake line question

[turbowrenchhead]

What is the easiest way to plum everything up? I have spindels on order from KOR. I have banshee master and calipers coming with stock lines. My front is +6 wider so I will probably need something custom. What do you guys suggest?

What is the easiest way to plum everything up? I have spindels on order from KOR. I have banshee master and calipers coming with stock lines. My front is +6 wider so I will probably need something custom. What do you guys suggest?

 

[Blaaster]

It is possible to use stock length lines, but you have to re position the calliper ends to be out of the locaters.

If you need a pic to see what I mean I can get one in the morning when it is daylight.

 

[turbowrenchhead]

A pic would be handy. I can't use stock lines because my bike is to wide.

 

[08yfzman]

Just order +3 lines from streamline for 03-06 blaster

 

[Blaaster]

Stock brake lines on a +6" widened.

Not suitable for terrain with sticks and rocks.

Ok for flat track and MX where there is little chance of them being fouled.

 

[Awk08]

Stock brake lines on a +6" widened.

Not suitable for terrain with sticks and rocks.

Ok for flat track and MX where there is little chance of them being fouled.

View attachment 11354

ahhh, your blaster is also lowered ?
thats why the stock lines fit, i'd bet at standard height/shocks the stock lines will not work

 

[Blaaster]

They do work ok at the standard height but the cable ties have to be changed for sloppier ones.

 

[turbowrenchhead]

I ordered the streamlines. I have two weeks to get this bike ready for a ride. I know that line kit will work nice.
I still have to get the motor in and have it dynoed, plus the same on the banshee.