Excess Blaster parts

slickerthanyou

New Member
Dec 23, 2009
7,615
140
0
Items: all + shipping OBO- Some trades welcome needs: 7/8" bars aftermarket of course-Rear hydro caliper-please no junk. Rappy 250 rear brake rotor

If item fits in small flat rate shipping will be $5.75, medium, $11.75, large $15.75 naturally these are USA prices only!

Stock Uncut flywheel-$20
Perfect Clutch cover with oil blockoff installed and stainless oil pump cover-$40
2005 stock gas cap with vent tube- $10
88-02- brake rotor and hub with boots and spring holders-$30
Stock Crank- will need rebuilt-$30
Outer clutch basket with gear no damage with or with out pressure plate-$40
Stock shifter-$5
Moose racing lower a arm teflon bearings and sleeves no caps (enough for one side)- $10
Stock reed cage with screws- $15
Boot for aftermarket carbs will fit 32-35mm with clamps- $10
Used to connect the carb to the intake-


forsale4_zpsc93c9006.jpg


forsale3_zps5b0b8039.jpg
 
Last edited:
put my name on that chain slider, folding shifter and rolled lip rim
i'll come pick them up soon !!!
 
One more thing to add, PWK 35mm A/S, Currently on my quad, in like new condition. $180 (Pending)


35mmAS1_zpsc6ca0850.jpg


35mmAS2_zps2633489e.jpg
 
Last edited:
Wednesday goes on ebay! what's left are:

Newly painted perfect shape clutch cover with oil injection block off and a stainless steel homeade cover- 40 OBO

2005 stock gas cap with vent tube- $10
88-02- brake rotor and hub with boots and spring holders-$30
Stock Crank- will need rebuilt-$30
Outer clutch basket with gear no damage with or with out pressure plate-$40
Stock shifter-$5
Moose racing lower a arm teflon bearings and sleeves no caps (enough for one side)- $10
Stock reed cage with screws- $15
Boot for aftermarket carbs will fit 32-35mm with clamps- $10
Used to connect the carb to the intake-