Engine

[callmej75]

Selling the motor I got...need some money. Comes complete with 35mm PWk Airstriker carb, clutch, and mag cover. The clutch cover is polished as of now. It has a Vitos 3mm stroker crank, all new bearings and seals, wiseco piston and rings, port annd polish and head milled that produced 36hp from a dyno sheet from Kennedy's. It also has a reed spacer and vforce 2 reed cage with reeds. The cases have been glass bead blasted and the jug blasted and clear coated with high temp paint from VHT. I will also throw in a spark plug as well. I have some high performance clutches I can throw in too that are brand new and a clutch cover gasket.

$700 Shipped

I have $1,000 easily in it

This is before stripping the clutch cover and polishing it

 

[callmej75]

This also comes with a full allen head bolt kit from Vitos for the engine. Everything besides the cases will need to be torqued as it's not totally tight and leak tested. Also the buyer will get 2 quarts of Klotz flex drive oil for the clutch crankcase. it also has the oil injection blockoff installed.

 

[callmej75]

******************SOLD*********************

 

[scotj77]

knew that wouldn't last long. great deal man

 

[callmej75]

I'll probably be selling off all of my parts...so watch for a new thread

 

[scotj77]

dibs on the swinger if you sell it. and the chain to go with it. the air box and the intake boot

 

[callmej75]

I'll see if I can get around to finishing this swingarm..if I can it's yours with the rest of the stuff you mentioned

 

[scotj77]

sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeettttttttttttttttt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!