Crank Seals/Primary Drive Gear Nut Trouble

[OldSkoolBlaster]

I am replacing the crank seals on the blaster this weekend.The Left/Stator side is done and went smooth.I am now working on the right/Clutch side and I am having trouble getting the Primary drive Gear nut off!I have soaked it in PB Blaster,hit it with the Impact,Tried a Breaker bar and broke a socket extension.This nut is on there! I have a clutch/stator wrench holding the crank from turning and can not get this nut to break loose.I am thinking of trying some heat from a propane torch?Any help is greatly appreciated. Thanx David

 

[nd jat]

That's what I had to use, then it went just like butter. I stil think every thing I did before loosed it up

 

[OldSkoolBlaster]

Alright I am going out to the garage to put some Heat on the nut with a propane torch,I hope this breaks her loose.